Artificial turf divided into fields for soccer fields for rugby, golf tennis and others. There is grass, which are used for multiple sports. Production and development of coatings artificial grass are concentrated in companies that manufacture carpeting, as the technology of weaving coatings are very similar. Thus, first came up with the production of coatings, resembling a carpet. Artificial turf – is roll coating.
It is cold-resistant, light resistance, water tight and does not form stagnant zones. When producing such a coating technology is used tufting. Simulate blades of grass bulk fiber weave into high ground, covered with latex. The material of fibers – polypropylene, polyethylene, or a combination, sometimes – fiber nylon. Here, Sean Rad expresses very clear opinions on the subject. Polyethylene is a soft fiber, and more slippery. If you fall on coating of polyethylene will not burn and abrasions, which could get a fall in the polypropylene coating. It is also important that the polypropylene can withstand temperature regimes Operating from -10 to +40 C, and polyethylene from -50 to +50 C, for different climatic zones of Russia and the cis is an important factor.
Typically, coating of polypropylene is cheaper than the coating of polyethylene. Mounting method divide these coatings Plumbing Infrastructure (with a layer of quartz sand or rubber granules) and nezasypnye. Charging on the fields, you can adjust the height of "stems" for various sports. Rubber backing helps prevent "Burn" athlete falls to the ground. Different sports require different types and artificial grass, which differ from each other in the source material, height, density and structure of the pile, used supplemental materials.