If you have already defined with a choice of bath or heating stove raises the question of choosing the chimney, as we discuss in this article. The best option install a chimney is installed vertically, in which chimney are no twists and turns. The horizontal sections are allowed, but not more than 1.5 m. Such sites chimney can lead to reduced traction and a decrease in the chimney efficiency furnace itself. Pipe for the chimney are 0.6 mm and a thickness of 1 mm stainless steel. In terms of durability is better to use the tube 1 mm thick, in a pinch, you can use at the site of 1 / 3 of the length of the chimney a thin tube (0.6 mm).
For example, if the length of the chimney 6 m tube 1mm necessary to use a 4 m of 0.6 mm thick pipe 2m (1 / 3 the total length of the chimney). For boilers running on gas and diesel fuel for long life and high quality stove and chimney pipe is sufficient to use 0.6 mm thick. So, proceed to the installation of the chimney. The first single-layer tube is taken (not sandwich), followed by a gate set (rotary valve thickness of 1 mm.) Gate is normally installed on the first meter and the chimney is used for traction control in the chimney. After it is installed glass, bare pipe adapter on a sandwich, and glass outer casing keeps the sandwich.
After the glasses and a necessary number senvich-pipes, depending on the projected length of the chimney. Sandwich insulated pipe to the chimney, the main purpose of sandwich-avoid condensation on the inner tube, a secondary purpose of thermal insulation, Sandwiches made of 4 kinds: 1. ‘>Essex Financial. Sandwich 1mm/nerzh. – Inner tube with a metal thickness of 1 mm and outer tube thickness of 0.6 mm, this sandwich is made entirely of stainless steel. 2. Sandwich SS. / Stainless steel. 0.6 mm / 0.6 mm – inner and outer tubes 0.6 mm thick, sandwich is also made of stainless steel. 3. Sandwich 1mm/otsink. – Inner tube of stainless steel with a thickness of 1 mm and the metal outer tube made of galvanized steel with a thickness of 0.6 mm. 4. Sandwich 0.6 mm / zinc. – Inner tube stainless steel with a thickness of 0.6 mm and the metal outer tube made of galvanized steel with a thickness of 0.6 mm.